Laser Watts to Joules
Pulsed lasers live in both units at once: joules per pulse for the energy, watts for the power — average and, far more dramatically, peak. This tool converts between them. It is the one corner of the site where the time in E = P × t is measured in nanoseconds.
Pulse energy ⇄ peak power
Physics only — never a safety judgement. Laser classifications follow IEC 60825 and depend on far more than energy and power.
The formulas
Same E = P × t as everywhere else on this site, at nanosecond scale. The general-purpose version is the joules to watts converter; the prefix converter handles the milli- and micro- figures lasers are usually quoted in.
Worked example: a Q-switched laser fires 50 mJ pulses of 10 ns at 10 Hz. Peak power = 0.05 ÷ 0.00000001 = 5,000,000 W (5 MW). Average power = 0.05 × 10 = 0.5 W. A half-watt device that briefly outshines a power station — that gap is the whole reason pulsed lasers exist.
Common pulse figures
| Pulse energy | Duration | Peak power |
|---|---|---|
| 1 mJ | 10 ns | 100,000 W |
| 10 mJ | 10 ns | 1,000,000 W |
| 50 mJ | 10 ns | 5,000,000 W |
| 100 mJ | 5 ns | 20,000,000 W |
| 1 J | 10 ns | 100,000,000 W |
| 1 J | 1 ms | 1,000 W |
Related converters
Questions
How do you convert laser watts to joules?
Multiply the average power by the time: joules = watts × seconds. For a pulsed laser the useful form is per pulse — pulse energy (J) = average power (W) ÷ repetition rate (Hz).
What is peak power in a pulsed laser?
The power during the pulse itself: pulse energy divided by pulse duration. A modest 50 mJ pulse squeezed into 10 nanoseconds peaks at 5,000,000 W — which is why pulsed lasers cut and mark while their average power looks tame.
What is the difference between peak and average power?
Average power spreads the energy over the whole second, gaps included. Peak power counts only the instant of the pulse. Both are honest numbers answering different questions — average for heating and exposure budgets, peak for material interaction.
How many joules is a 5 mW laser pointer per second?
0.005 joules per second — 5 mJ. Continuous lasers are quoted in watts precisely because the per-second energy is the power; pulses are quoted in joules because each pulse lands separately.
Can this calculator judge laser safety?
No. Eye and skin safety depend on wavelength, beam diameter, divergence and exposure time, not just energy and power. Classifications follow IEC 60825; treat every figure here as physics, never as a safety verdict.
Sources: unit definitions follow the BIPM SI Brochure (the watt as one joule per second) and the NIST Guide to the SI (SP 811). Full sourcing on the Methodology page.